Mission-critical equipment that must survive. Every time.
Fill in the request form
Or view our products
Military & heavy-duty system
Built to withstand the severe shock and vibration profiles of military ground vehicles.
Military Communication Damper (MCB)
For reliable shock and vibration protection of mission-critical communication systems
Communication dampers provide controlled mechanical isolation between vehicle structures and sensitive communication equipment. They reduce the transmission of high-shock events and continuous vibration, ensuring stable load transfer and consistent performance under demanding operational conditions.
✓ Sensitive electronic equipment must be protected against shock and vibration
✓ High acceleration levels occur during weapon firing or rough-terrain operation
✓ A long service life of communication hardware is required
✓ Installation space is limited but secure mounting is essential
- Tracked and wheeled military vehicles
- Tactical communication shelters
- Armoured platforms
Hydraulic End-Stop Damper (HED)
For extreme impact absorption and controlled end-of-travel damping.
Hydraulic end-stop dampers are designed to absorb high kinetic energy at suspension end-of-travel positions. The hydraulic system dissipates impact energy in a controlled manner, preventing structural overload and protecting suspension and chassis components under severe operating conditions.
✓ Extreme impact loads occur at the end of travel
✓ Controlled energy dissipation is critical
✓ Suspension components must be protected from peak forces
✓ High repeatability under successive shock events is required
✓ Operation takes place in harsh environments
- Armoured tracked vehicles (e.g. Leopard 2 platforms)
- Heavy military suspension systems
- Off-road and tracked machinery
- High-mass systems with end-stop energy management requirements
Does your project require validated compliance with NATO or international defence standards?
All Damping Solutions defence products are engineered and documented to the standards that matter in defence procurement, with testing carried out in an accredited ISO/IEC 17025 laboratory.
✓ MIL-STD-810 / MIL-STD-167
✓ MIL-STD-901
✓ AECTP-400
✓ DEF STAN 00-035
✓ BV 0430 / BR 8470
Products from our range
Our catalogue contains various products that may be suitable for use in defence and military environments. From extreme shock absorption to structure-borne noise control. The selection below is drawn from our full range; for specific requirements, feel free to contact us.
KQV2.5 20-02
KQV2 .5 20 - 02
JV1.5 1-10
JV1.5 1 - 10
JV1.5 15-10
JV1.5 15 - 10
JV1.5 5-10
JV1.5 5 - 10
JV1.5 3 - 10
JV1.5 3 - 10
All our products are manufactured and tested in Europe.
"At Damping Solutions, we don't test to pass. We test to ensure mission-critical performance when it matters most."
WE START WITH THE SCENARIO THAT YOUR SYSTEM MUST SURVIVE.
A damper that supports the right static load is not automatically the right damping solution.
We look at the complete system: the mass, centre of gravity, excitation frequencies, expected shocks, mounting direction, available movement and operating environment. We also consider the standards your equipment must comply with.
Only then do we select, calculate or develop the solution.
This system-level approach helps prevent resonance, instability, excessive displacement and premature failure. It also gives you something more valuable than a product specification: confidence that the complete installation will perform as intended.
Facts about us
✓ Established in Romania in 2006
✓ 60+ specialised engineers and technicians
✓ 3,600 m² European production facility
✓ ISO 9001 and ISO 14001 certified production
✓ Proprietary calculation and simulation software
✓ Testing under ISO/IEC 17025 accreditation
✓ Worldwide delivery within two to three weeks
How do you calculate the correct isolation system?
Our in-house calculation & simulation software analyses spring and damper systems under severe shock and vibration loads, in both time and frequency domains, including non-linear spring characteristics and repeated shock events. The output is a validated engineering report ready for your certification process.
Frequently asked questions by clients in the defence industry
Damping Solutions provides engineered shock and vibration isolation for a wide range of military platforms, including tracked and wheeled military vehicles (APCs, IFVs, MBTs), tactical communication shelters and command platforms, armoured vehicles (e.g. Leopard 2, JLTV-class), military rotary-wing and fixed-wing aircraft, naval vessels and shipborne electronics, and unmanned platforms (UAVs, UGVs). All solutions are engineered to the mechanical and environmental demands specific to each platform type.
Yes. Communication systems, radar electronics, navigation units, and onboard computers are among the most vibration-sensitive payloads in military use. Our wire rope isolators and Military Communication Dampers (MCD) are specifically designed to protect these systems against both continuous vibration and high-energy shock events, keeping them operational at all times, regardless of terrain or firing conditions.
Damping Solutions products are used on armoured platforms, including the Leopard 2 and JLTV class. Our Hydraulic End-Stop Dampers (HED) are designed for the extreme impact loads generated by heavy suspension travel, weapons recoil and off-road driving, environments where conventional elastomeric solutions fail.
Yes. Naval environments combine severe shock loads (from underwater explosions and sea state impacts) with constant broadband vibration. Our isolators are engineered to handle both conditions simultaneously. Corrosion-resistant coatings and materials are available for salt-water environments.
Damping Solutions products are engineered and documented to comply with the following standards: MIL-STD-810 / MIL-STD-167 (environmental and vibration testing), MIL-S-901D (shock, naval shipboard), AECTP-400 (Allied Environmental Conditions and Test Procedures), and DEF STAN 59-411 (UK Defence Standard for EMC and environmental). All relevant documentation is provided as part of our procurement package, including test reports, compliance declarations, and material traceability.
Don't have operational load data available yet?
When real-world shock and vibration levels are unknown, our Field Measurement & Data Logging [FMD] service records conditions directly on-site. Measured data is converted into SRS curves and load cases, so your team can engineer with certainty from the start.
Typical applications:
- Military vehicles and naval platforms
- Offshore structures
- Industrial machinery in demanding environments
NOT SURE WHICH DAMPING SOLUTION FITS YOUR APPLICATION?
Start with a free calculation
Our engineers perform a first calculation free of charge.
Send us your load and frequency data, and we'll recommend the right isolation concept with full documentation for your engineering or procurement process.